Reinforced Concrete Piles

Spiral Drillers Civil has the ability to construct reinforced concrete piles in diameters from 300mm to 3600mm, and depths to 42m. Deep piles are constructed using our specialist fleet of drilling rigs. Small and shallow piles can be constructed with pendulum rigs.

Bored piles can be belled to up to 3600mm diameter with a special belling tool.

Grooving of piles can be achieved to the project specification.

Boreholes can be supported by temporary or permanent casings as per soil conditions; casing for all diameters can be installed and advanced ahead of drilling works using our various vibratory hammers.

In wet soil with high ground water levels, drilling can done using mineral (bentonite) or polymer slurries.

Application

  • Contiguous wall
  • Soldier pile wall
  • Palisade wall
  • Foundation piles for building and structures
  • Bridge piles
  • Plunger piles for top down construction

Projects

Project Name - University of Auckland Engineering School

Project description

Drill 900mm diameter and 1200mm diameter building piles approx. 20m deep with all piles being spiral grooved

Machine used

2 x Soilmec drilling rigs

Special difficulties

Project finished ahead of schedule and on budget

Project Name - Grower's Stadium, Pukekohe - Light Foundations

Project description

Construct 1500mm diameter x 10m deep piles for light towers

Machine used

Soilmec R312

Special difficulties

As this is a rugby stadium, no damage could be caused to the grounds.  Project completed on schedule

Project Name - Rydges Hotel, Auckland

Project description

Construct 17 piles ranging from 450mm diameter to 750mm diameter up to 20m deep with all piles being spiral grooved

Machine used

Soilmec CM39 and pendulum machines

Special difficulties

Traffic management and pedestrian access required.  Restricted site area to work in

Project Name - Rydges Hotel, Auckland

Project description

Drill 5 x 450mm diameter x 16m deep micro piles to underpin and strengthen existing foundations

Machine used

MTrack

Special difficulties

A challenging project as drill heads had to be altered to penetrate through rock and there was limited head height

Project Name - 1 Hobson Street, Auckland

Project description

Construct pile foundations for high rise building with underground carpark

Machine used

Soilmec CM39

Special difficulties

Penetration through existing seawall required

Project Name - Hepburn Substation, Auckland

Project description

Drill 1500mm diameter x 4m deep pole foundation for wires feeding into substation

Machine used

Volvo 14T

Special difficulties

Overhead power wires

Project Name - Vodafone Tower, Pt Chevalier

Project description

Construct cast in-situ pile foundations 900mm diameter x 15m deep for Vodaphone tower

Machine used

Soilmec CM39

Special difficulties

Site had to be kept clean at all times due to close proximity to road

Project Name - Drake Street, Auckland

Project description

Soldier pile retaining wall on boundary of construction site, topdown construction used to create basement for new high rise building

Machine used

Soilmec CM39 & Volvo 14T

Special difficulties

Restricted access, limited workspace, drilling against existing buildings and restricted work hours due to residential properties in the vicinity.  Old water wells on property had to be cased and cleaned out to enable location of new piles

Project Name - Waimauku Village, Auckland

Project description

Drill and place poles with concrete, drive poles, and install tiebacks to deadman to strengthen 100m long x 3.5m high timber retaining wall

Machine used

PD1200 & PC200

Special difficulties

Working in conjunction with earthmoving contractor constructing new retaining wall for village shops.  Limited timeframe for completion of project

Project Name - New World, Remuera

Project description

Drill and construct 20 piles for refurbishment of supermarket

Machine used

Yanmar 1.5T

Special difficulties

Confined space, work had to be carried out through the night before opening the next day and aisles had to be kept clean

Project Name - Ranfurly Street, Epsom

Project description

Drill 600mm dia x 7m deep soak hole behind house

Machine used

EX40

Special difficulties

Difficult access

Project Name - Hobsonville, Auckland

Project description

Abutment retaining piles for new bridge

Machine used

Mercedes Unimog

Project Name - Herne Bay

Project description

Drill 73 x 450mm to 600mm diameter x 9m deep piles along boundary line for excavation of new basement for house

Machine used

Volvo 14T

Project Name - Great South Road, Penrose

Project description

Drill 600mm diameter sign foundation into solid basalt rock

Machine used

Soilmec R312

Special difficulties

Traffic management required as working on roadway

Project Name - Slip Repair, Auckland

Project description

Drill 600mm diameter x 15m deep piles for slip repair

Machine used

Soilmec CM39

Special difficulties

Working off existing road to stabilize potential slip

Project Name - Transpower tower foundations

Project description

Install 12 x 1800mm diameter x 16m deep foundation with permanent caisson

Machine used

Soilmec R312

Project Name - Bridge 51, Glen Eden Railway Station

Project description

Drill piles at side of railway line for new pedestrian bridge

Machine used

Soilmec CM39

Special difficulties

Working in the rail corridor with consequent limited room and working hours

Project Name - Kerikeri Bridge

Project description

Drill and construct 900mm diameter piles using permanent casings down to rock. Pier piles were in clusters of 10 with abutment piles each end

Machine used

R312

Project Name - Ormiston Road Bridge

Project description

Drill 16 cast in situ piles x 750mm diameter x 13m deep and drive 98 350SED poles ranging from 4 – 8m in length

Machine used

Soilmec R312 and PD1200 pile driver